Calculating Motor Speed:

A squirrel cage induction motor is a constant speed device. It cannot operate for any length of time at speeds below those shown on the nameplate without danger of burning out.

To Calculate the speed of a induction motor, apply this formula:

Srpm = 120 x F
            P

Srpm = synchronous revolutions per minute.
120   = constant
F       = supply frequency (in cycles/sec)
P       = number of motor winding poles

Example: What is the synchronous of a motor having 4 poles connected to a 60 hz power supply?

Srpm = 120 x F
            P
Srpm = 120 x 60
            4
Srpm = 7200
             4
Srpm = 1800 rpm

Calculating Braking Torque:

Full-load motor torque is calculated to determine the required braking torque of a motor.
To Determine braking torque of a motor, apply this formula:

T = 5252 x HP
    rpm

T      = full-load motor torque (in lb-ft)
5252 = constant (33,000 divided by 3.14 x 2 = 5252)
HP    = motor horsepower
rpm = speed of motor shaft

Example: What is the braking torque of a 60 HP, 240V motor rotating at 1725 rpm?

T = 5252 x HP
    rpm
T = 5252 x 60
     1725
T = 315,120
     1725
T = 182.7 lb-ft